- Stefaan Coddé
- Last Active
Windows 7 is not fully supported by Microsoft. It's advisable to upgrade to windows10 Home if Your windows 7 is a home edition or windows10 pro if Your windows7 is a pro edition. So the crashing can be caused by windows 70 in the first place. …
Why You want that don't You trust your employees Bricscad locks the dwg so someone else can not open it and edit the drawing , they just can open it read only saving under the same name does not work and indeed a cad authoring system is even…
As usual with performance You should mention OS, how many ram, which videocard, harddisk or SSD as work partition and the resolution of Your desktop and if this is a laptop ,
If I open a 100 MB DWG , this goes fast since Pci-e SSD and o…
Are you working on an SSD? Do know that SSD manufacturers may sell SSD's with defects on? Not many but it's allowed. And do note after some time an ssd might get more problematic cells if 80% of the volume is reached. I had a simple DWG with t…
same here on windows 10 pro 64 bit, frequent sudden crashing and ZERO saved , I guess an answer from bricscad is, update to V21 but that is not acceptable I'm coming at the point to advice my lawyers cause this is not acceptable So windows10 …
The last windows10 caused the problem, unstalling the last updated removed and no problem anymore.
OT but very important.
If this computer is connected anyhow to the internet , dump XP asap.
This platform is a target for all those who are finding still open exploits and Microsoft does not fix it.
Upgrade to windows 7 or …Install windows10 always from scratch.
Cause if You upgrade windows 7 or 8 and if the registry of windows 7/8 is already a mess then sure that the upgrade fails.
BricsCad Platinium V16 in my case runs rock stable on windows10 pr…Is this computer part of a domain?
so computer connected to the server?
Use at least a 1gbps connection.
it's very easy to occupy a 100mbps connection , even in 2D architectural work.
describe you computer, so:Parametric history means :
for instance, a box has 4 fillets and one hole and one extruded cylinder.
If I edit the fillet, from R3 to R5 then all four corners are updated.
I can change the diameter and placement of the hole…Parametric?
Parametric 3D means full history of the 3D part so applications as old mechanical desktop and inventor , pro engineer etc are real parametric 3D applications.
Bricscad is sure not yet parametric.
3D cons…Look no further, the video controller is still good for 2D but simply too slow for 3D
And sure if the laptop is not connected to the ac grid then windows will slow down video to save battery power.
so this laptop has to be connected t…Work related: as soon when You have to wait between each commands , no matter which 3D program, I would say, reasons enough to complain.
On my old company pc: this drawing could be opened but slow zooming and frequent autocad crashes. by …It's better to use a dedicated pc for 3D Cad cause standard computers have a dozen more apps that can lead to problems.
If on a standard setup, there a few things to look at.
On 64bit hardware, stick to 64 bit videodrivers and m…If you are using windows 10 in a production environment then there are a few things to do:
First, settings, privacy, turn everything off there.
Second: windows updates related, again settings... then the last icon: update …Translated:
I'm a beginner and look for a manual, preferably in Russian, on how to build BRX plugins from scratch.
I would say, english is also good.Depends on the fact if You are drawing primarily in 3D or most in 2D.
For 3D go for a high end AMD or high en nvidia consumer card based on GDDR5 video ram.
if you have to deal with large 3D drawings, then fireGL or Quadro, these have…I use Bricscad platinium on Windows 10 professional 64bit but not an windows10 upgrade.
I created media version and installed windows 10 from scratch to avoid problems of the upgrade.
There is not much different between windows7…Same here:
We use architectural xref's.
As soon when there are small errrors within the xref drawing, autocad 2014 (the full version) crashes while opening the drawing.
Bricscad and draftsight have no problem to open …Why make iit so complicated.
line AB: select A and drag it up or down to give it's direction to go to and a distance.
Direction can be up/down, left-right depending where the endpoint is dragged.
Autocad does it, okay…