Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Jose Barzuna

About

Username
Jose Barzuna
Joined
-
Visits
49
Last Active
Roles
Member

Comments

  • @Jacobdesutter said: Take some time to understand what the different parameters are and how they are used to ensure a correct floor-to-floor height, correct riser heights etc. Hi Jacob, Is there a way to capture the floor to floor height by…
  • I have used the express tools in English for a while with no problems, even the Breakline command works fine. I am currently in V18 but I doubt that the version is the issue Remember that windows will lock the help file by default, you have to sel…
  • Hi Torten, Thanks for the Update.  Just that every now and then we get draftmen that seem to look for that feature.  I feel that with the enhancements in V17 BIM will change the way we do things. Regards, Jose
  • Hi Carlos, Thanks. We did find this post on the Vector site, however, the Vector licenses were of the rental type and turned off before the office was fully migrated, I do believe that users are starting to realize the danger of running an office wi…
  • We recently experienced a similar problem upon replacing the printing device, as it turned out there was a flaw in the device's drivers, the manufacturer, Ricoh, played around with the driver until it started working OK in our company.  You might wa…
  • Hello, I have been trying to install Brics for Linux in ubunto    ubuntu-10.04-desktop-amd64.iso   without luck, my process: Download and install latest Ubuntu (virgin installation in my lap HP dv6 with AMD processor and ATI graphics card)On line …
  • Hello Torsten, Was just testing the BcadTools and in my computer the Multiline Edit and Modify button opens up a dialog that were all bottons display a messague that the option is not ready yet, is this correct or is there something wrong with my i…
  • Hi Erick, Redhorse feels very much like Goldmine but with support, Connie is great at helping you out.  I loaded the program several weeks ago in my lap and started using it as a trial system separate from the company email system, this past friday…
  • I have been triying to move to linux for sometime now, CRM has been one of my headaches, the best that I found in the Linux world was Sugarcrm, but we found that it was plaged with many bugs especially if you consider that email is important in your…
  • Hi, As Erick and Tijs mentioned this is still short of being an Alpha we can not yet judge the new Linux version as it is being made available just to satisfy our unrelenting thrist of knowing that there is something going on.  Having been a Bricsc…
  • We experienced really slow print times in some old HP plotters which showed a good printing times in other programs, we finally traced the problem to drivers that were not available for the OS that was being runned in the machine that had the plotte…
  • Hello Daniel, I have been recently testing the Doctabs application (downloaded from Bricscad website), really nice work, thanks for sharing with all of us.  I tried to visit theSwamp, but I am being asked a user and password, does this means that w…
  • Hello, Rakesh, is the program fully ported, last time I looked at it it was still being ported. Regards, José
  • we use Sivandesign´s Civilcad with good successs
  • In Support Request 20196 I have posted in the attached .zip a document file with a detail explanation of the issue of how the layers and DrawOrder does not behave as expected Best Regards, José
  • Hello, We do extensive use of xrefs, we have found problems with the program maintaining layer choices and draworder when binding and refediting An often unknown feature of xreferencing is the fact that it is possible to make reference address rel…
  • Louis, Further studiying problems associated with binding we have found further problems: Will occasionally change xreff propertiesWill occasionally turns on layers that were off or frozenWill occasionally change layer colors Is there any chance …
  • Is there a way to accomplish this in V9
  • Hello Hans, Will the new trim also work with Hatches? Regards
  • Hello, My screen seems to be cutting about 3 to 4 letters on the right hand margin when displaying the forum posts, could this be related to the new modifications?
  • Looking to buy my new lap I am considering a quad core machine so I wanted to ask Hans if there is an update on multicore support for Bricscad, if not yet available any information on future plans on this matterBest Regards,Jose
  • Hello,I understand that Bricscad has created a task for this issue (TaskDD322), it would be nice to know from the Bricsys team the current status of this feature.
  • Latest Bricscad does not have a rendering engine yet, however, you can get version 7 using the same license key as you might have for V9 and use it to render, I guess some time in the near future we will see the rendering capability back.Best Regard…
  • We use an HP500 and we had problems with the HP driver in the past, the first thing you need to do is to make sure you have administration rights, go into the HP driver and make your print settings one of the custom sizes and go to the tab where you…
  • How does a drawing gets nearly half a million of empty text strings accidentally?I have had some rather simple files in the past that I could never figure out why they where slow, however, in several cases by creating a new file and doing a copy pas…
  • Hello Stiene,Thanks for your response, the reason we found important in the past to be able to differentiate among master and slave references is when we need to delete references no longer needed that were inserted as a temporary drawing to obtain …
  • Hello,While you fix this it might be a good idea to look into something else, when Bricscad displays refferences it is impossible to distinguish among master and and slave refferences which are pulled because they are nested in a master refference, …
  • Hello Hans,Already did, SR 16730Best Regards,Jose
  • Xreffs regularly store the full path (c:........), this requires that when the files are moved the user has to reconstruct the path for a program like Bricscad to find again the location of the Xreffs, in contrast, it is possible to use relative pa…
  • Es sencillo,Seleccionando en Tools/Inquire/ID Coordinates el Bricscad responde en la ventana de texto con las coordenadas del punto seleccionadoSaludos,José
Origami
Origami is the Japanese word for paper folding. ORI means to fold and KAMI means paper and involves the creation of paper forms usually entirely by folding.

Powered by VanillaForums, Designed by Steam