KimbleC

Comments

• As promised I have had a suitable answer from Support. Tiberiu Toader 10-03-2020 09:11 UTC Dear Kim, OLE image visibility display is controlled by _OLEQUALITY variable, by default is set to [0] Monochrome. The ole2frame has a dxf73 storing…

  in Not printing image in colour Comment by KimbleC March 2020
• Thanks Jason .... Not sure if I am able to download and use V19 as I have already registered V20. James ..... If the image is OLEs then the issue of sending the native drawing is that you must also send the image. These are generally only logos in…

  in Not printing image in colour Comment by KimbleC March 2020
• Thanks for all the prompt feedback. Unfortunately this did not work. Copied the BricsCAD 'Print as PDF.pc3' file as 'DWG to PDF.pc3'. Opened my image and copy/paste into my drawing. Bugga.... still black/white Not sure what else i am not gettin…

  in Not printing image in colour Comment by KimbleC March 2020
• Louis I am printing 100% colour. I have a colour image that has been copy/paste into drawing using AutoCAD and this prints just fine. When I copy/paste a new colour image into the same drawing using BricsCAD this image does NOT print colour. Wha…

  in Not printing image in colour Comment by KimbleC March 2020
• Thanks James. Correct ..... does not matter if you have all colour selected in the ctb or what ever. Still plots pdf or paper greyscale.

  in Not printing image in colour Comment by KimbleC February 2020
• Further investigation If I attach the image like an xref the printing is ok. Still not sure why the copy/paste image does not work however. Kim

  in Not printing image in colour Comment by KimbleC February 2020
• Thanks That will work a treat.

  in (missing: DWG to PDF.pc3) Comment by KimbleC February 2020