Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Richard Beneke

About

Username
Richard Beneke
Joined
-
Visits
14
Last Active
Roles
Member

Comments

  • We have been having the same problems. I had been using V18 through to October 2020 without a problem. Upgraded to V20 to learn the BIM features for which we had earlier purchased a license, and the problems of locked up BricsCAD began. Sent a bu…
  • Dont know about .ocx control, but there are system variables that may help. Search for 'thumbnail' in the settings dialogue.
  • Inconsistent face-body relationships can occur if the section plane is the same as the plane of a face on the solid. Can also occur if the solid somehow has 2 parallel faces with zero space between, or very thin wedges left after boolean operations,…
  • What you want to do will probably not be possible. A graphics card needs to be on a system bus on the motherboard. Previously VESA, AGP and PCI, now its PCI-E that is used. Doubt you will find hardware to effectively do what you want. There are …
  • I suggest you test before spending to see if it will work ok. You may have the problem of large coordinate numbers not being processed properly, depending on your units of measurement (mm metres or feet) and coordinate system (site local or wgs84).
  • Ricardo, glad to be of some help. I was also sceptical of the extra cost of the professional cards until I had this problem. Unfortunately I cannot share the files as they contain client info inside too many objects. Tom, I did the tests and am s…
  • Hello Ricardo My testing on the system here has suggested that the the problem relates to the numeric size of the object geometry. In my CAD model, if the steel beam sub-assemblies are "parked" beside each other, the gaming card can shade the imag…
  • The effect that I described could be called bleed-through. But there are other artefacts as well : The viewport border has shifted onto the image, the UCS icon has become disconnected, and some faces have shifted relative to others. The attache…
  • I have also been struggling with fields in attributes in blocks. The AutoCAD defined blocks that I have been using in BricsCAD for about 2 years stopped working some months ago. The basics of the (drawing title) block and the manually entered attri…
  • Bricscad 16.1.02. During the last few days I have also been having linetype problems with drawings that behaved normally in the past. CANNOSCALE 1:1 , LTSCALE 1 , UNITS mm , MEASUREMENT ON , PSLTSCALE 1 , Line object properties scaled 1.0, loaded t…
  • Having just read the helpful e-book 'BricsCAD for AutoCAD users' , I have tried again to use my complex linetypes, and they worked in BricsCAD !  It seems the problem was because my.lin and my.shx were in different folders, although both were listed…
  • A simple method without needing to write a .lsp : 1) Open properties dialog box/panel. 2) Select all viewports 3) Change locked property in dialog box/panel.
  • I recently tried to use some complex linetypes with embedded shapes.  These linetypes had worked in Acad 2002 to 2011.  Bricscad 15 would not read the file.  I am still hoping Bricscad may have documentation that would help me fix it, not found anyt…
  • The debate of cheap GTX versus expensive Quadro has been debated in many forums. For pixel images used in gaming and DirectX the GTX is an obvious choice. For calculating polygonal faces from a mesh or solids model, the Quadro performance is superio…
  • I am trying to determine a suitable spec for a desktop/workstation pc upgrade, and i also find the BricsCAD graphics requirements confusing. For good graphics performance and OpenGL capability on BricsCAD, legacy AutoCAD, structural analysis, Photom…
Origami
Origami is the Japanese word for paper folding. ORI means to fold and KAMI means paper and involves the creation of paper forms usually entirely by folding.

Powered by VanillaForums, Designed by Steam