Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

AMD GPU RX6800 - newest driver installed - latest V21 Bricscad disappears from screen

Has anybody any clue what Driver Settings I should set up in AMD Software ?

Today I installed the latest AMD Driver 21.5.1
(I use default settings and explicitly reset to default)

I can open latest Bricscad V21, choose welcome screen,
see start screen. But when I try to open any blank or existing file,
Bricscad warns : "Screen update was interrupted, because of unknown error"
If I click OK, Bricscad will silently disappear from screen after 5 seconds.

Interestingly, all other CAD or 3D Software has no issue at all.

Crash Report mentions again RedSDK :
( I wonder why RedSDK is so annoying since a few months now,
for years Windows Bricscad was as stable as any average demanding App)

--------------- 06-05-2021 23:00:55 --------------- v21.2.03.0 ---------------
Unhandled Exception:
ACCESS_VIOLATION (C0000005) in module atio6axx.dll at 0033:00007FF80B22AA30
Registers:
RAX=lX RBX=lX RCX=lX RDX=lX RSI=lX RDI=lX RBP=lX RSP=lX RIP=lX EFL=B0AB4F18 CS=0000 DS=0000 SS=636FD3A0 ES=14D1C880 FS=14D1C5B0 GS=B0A77320

Call stack (current) (main):
DrvPresentBuffers()+0x00000000012AFD80, (0x3FF0000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), atio6axx.dll, 0x00007FF80B22AA30
DrvPresentBuffers()+0x000000000027261B, (0x0000000014D1C880 0x0000000014D1C5B0 0x000000007FFFFFFF 0x0000000000000003), atio6axx.dll, 0x00007FF80A1ED2CB
RED::Vector::~Vector()+0x000000000000A46A, (0x000000007FFFFFFF 0x0000000000000000 0x0000000000000001 0x0000000000000000), REDCore.dll, 0x00000001804EB89A
RED::Vector::~Vector()+0x0000000000009FCF, (0x0000000000000020 0x0000000000000000 0x00000000116D59E0 0x00007FF80A1648ED), REDCore.dll, 0x00000001804EB3FF
RED::Vector::Allocate()+0x0000000000018C96, (0x0000000014D1ED80 0x00000000102A3FAA 0x00000000F7FD8358 0x0000000000000002), REDCore.dll, 0x000000018051A6B6
RED::Vector::~Vector()+0x0000000000008C4E, (0x000000003F8BCE00 0x00000000F7FD8228 0x0000000000000000 0x0000000000000000), REDCore.dll, 0x00000001804EA07E
REDRender::DrawAllLists()+0x00000000000000F7, (0x000000003F918D90 0x0000000000000000 0x0000000000000001 0x000000000FFBB2D6), REDCore.dll, 0x0000000180675D17
RED::Vector::~Vector()+0x0000000000006713, (0x000000001174B010 0x00008001800D0F93 0x3F5A217A00000001 0x0000000000000000), REDCore.dll, 0x00000001801F8FF3
RED::Vector::~Vector()+0x0000000000001433, (0x000000001174B010 0x00000000800C256A 0x0000000000000001 0x0000000000000000), REDCore.dll, 0x00000001801F3D13
REDWindow::FrameDrawing()+0x0000000000000E6B, (0x0000000000000000 0x0000000000989680 0x0000000000000000 0x0000000000000000), REDCore.dll, 0x000000018094DD9B
rd::maxNonCutoutOpaBlendFactor()+0x0000000000011714, (0x0000000000000000 0x000000006C383800 0x0000000014D1ED01 0x00007FF836C8F000), odview.dll, 0x00000001800B2E04
rd::maxNonCutoutOpaBlendFactor()+0x00000000000112FD, (0xFFFFFFFF9D6C0623 0x0000000000000001 0x0000000000000000 0x000000003F8B8500), odview.dll, 0x00000001800B29ED
rd::maxNonCutoutOpaBlendFactor()+0x000000000000F8FE, (0x0000000000000000 0x0000000000989680 0x0000000000000001 0x00000000636FE588), odview.dll, 0x00000001800B0FEE
rd::maxNonCutoutOpaBlendFactor()+0x000000000000F61A, (0x00000000A1121C01 0x0000000000000000 0x0000000000000000 0x000000004AC0390A), odview.dll, 0x00000001800B0D0A
rd::maxNonCutoutOpaBlendFactor()+0x000000000000F05B, (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x00000000636FE6B9), odview.dll, 0x00000001800B074B
OdGsModelLayoutHelper::rxUninit()+0x0000000000007A3E, (0x0000000000000000 0x0000000000000000 0x000000006C318218 0x000000006BBABB30), TD_DbCore_21.4_15.dll, 0x00000001800D1D3E
oa::saveLidsToDwg()+0x00000000000007DA, (0x0000000000000000 0x000000006BBA9E50 0x0000000000000000 0x0000000000000000), odapp.dll, 0x0000000180253BDA
oa::CDwgViewer::updateDevice()+0x0000000000000080, (0x00000000000005F4 0x0000000000000000 0x0000000000000000 0x0000000000000000), odapp.dll, 0x000000018024CAB0
oa::CDwgViewer::update()+0x000000000000011D, (0x0000000000000000 0x0000000000000000 0x00000000A0D12750 0x0000000000000000), odapp.dll, 0x000000018024CF3D
wxg::WxgView::draw()+0x00000000000002DC, (0x0000000000000000 0x0000000000000001 0x00000000482DDD88 0x0000000000000000), wxgui.dll, 0x000000018045E21C
wxg::WxgDoc::doRedrawAll()+0x00000000000000EB, (0x000000000AC92078 0x0000000014E14960 0x00000000636FEA89 0x00000000171F21E8), wxgui.dll, 0x000000018024CE8B
wxg::CApp::fileDbOpen()+0x000000000000017E, (0x000000006BA803B0 0x0000000014E14960 0x0000000048E2FCF0 0x00007FF83953B86B), wxgui.dll, 0x000000018020719E
wxg::MainWindow::handleCommand()+0x0000000000000111, (0x0000000001720000 0x0000000140000000 0x0000000000000008 0x000000000000041C), wxgui.dll, 0x00000001802CAB01
dc::DcMainWindow::handleCommand()+0x0000000000000076, (0x0000000014E150DC 0x0000000014E15078 0x0000000014E14FF0 0x0000000048E2FCF0), bricscad.exe, 0x0000000140055EB6
wxg::CApp::doHandleCommand()+0x0000000000000160, (0x0000000000000000 0x0000000006A2041C 0x0000000014E150DC 0x000000005DDC7A60), wxgui.dll, 0x0000000180205FD0
dc::MFCToolBar::~MFCToolBar()+0x00000000000020C8, (0x0000000014E150DC 0x0000000014E1041C 0x00000000636FEF58 0x0000000000000000), bricscad.exe, 0x00000001400192E8
cmd::CmdApp::openFile()+0x000000000000016D, (0x000000000602AF88 0x000000006C13C020 0x0000000014E14960 0x00000000000013EC), commands.dll, 0x00000001805624FD
cmd::importFile()+0x0000000000008630, (0x00000000000013EC 0x0000000000000000 0x00000000FFFFEC77 0x0000000001880000), commands.dll, 0x00000001804F0380
ca::InternalCommand::execute()+0x00000000000003F9, (0x000000006C0E3A10 0x000000000AF4EA30 0x000000000AF4EA30 0x000000005AB1DE80), cadapp.dll, 0x000000018035CB29
OdEdCommandStack::addCommand()+0x000000000000131C, (0x00000000018EDA20 0x000000005AB1DE80 0x0000000000000000 0x00000000636FFD70), TD_Root_21.4_15.dll, 0x0000000180010F8C
ca::CommandProcessor::execCommand()+0x0000000000000447, (0x000000005AB1DE80 0x00000000636FFBD0 0x00000000636FFD70 0x000000000AF4E9C0), cadapp.dll, 0x00000001801DDE57
ca::CommandProcessor::execStr()+0x0000000000000452, (0x0000000006B14118 0x0000000040BDBCE0 0x00000000636FFD70 0x000000000AF4E9C0), cadapp.dll, 0x00000001801DCEB2
ca::CommandProcessor::processString()+0x0000000000000203, (0x000000006C1C2A00 0x0000000000004002 0x000000006C1C2890 0x0000000000000000), cadapp.dll, 0x00000001801DC8E3
ca::CommandProcessor::processNextCmdItem()+0x0000000000000225, (0x000000000AF4E9C0 0x000000000AF4E9C0 0x000000000AF4E9C0 0x00007FFFEA9964B9), cadapp.dll, 0x00000001801DB055
ca::CommandProcessor::processIdle()+0x0000000000000226, (0x000000000AF4E9C0 0x000000000AF4E9C0 0x0000000000000000 0x0000000000000000), cadapp.dll, 0x00000001801DB346
ca::CommandProcessor::main()+0x0000000000000028, (0x000000000AF4E9C0 0x0000000000000000 0x0000000000000000 0x0000000000000000), cadapp.dll, 0x00000001801DB888
ca::CommandProcessor::start()+0x00000000000000A6, (0x0000000000000000 0x0000000059D81F70 0x0000000000000000 0x0000000000000000), cadapp.dll, 0x00000001801DA9A6
ca::CommandProcessor::mainWorkFlowProc()+0x0000000000000026, (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), cadapp.dll, 0x00000001801E4266
RegQueryInfoKeyA()+0x00000000000003F1, (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), KERNELBASE.dll, 0x00007FF836DF2DB1
RtlUserFiberStart()+0x000000000000001A, (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), ntdll.dll, 0x00007FF83958FF1A
.........

Comments

  • BTW,

    latest V20 does the same screen exodus ....

  • OK, the latest Driver was an "optional" driver.
    So I went down to the last recommended WHQL driver (21.4.1) and restarted
    my PC and even "repaired" Bricscad V21.
    But I still get the same message and Bricscad disappearing from screen.

    Not sure what it is.
    - Bricscad V21.2.03
    (unlikely, I think it worked before)
    - AMD driver update
    - (no more that sure after WHQL downgrade)
    - Windows latest Wednesday Patch ?

    Has anybody else experienced any problems with Bricscad and latest
    Windows Patches !?

  • Went downgrading step by step until AMD Software 21.3.1
    and Bricscad works again.
    So the culprit are any AMD App drivers above 21.3.1 WHQL like
    21.4.1 and latest 21.5.1.
    Seems like, no Problem with Windows Wednesday Updates.

    Already filed a SR ...

Sign In or Register to comment.
Origami
Origami is the Japanese word for paper folding. ORI means to fold and KAMI means paper and involves the creation of paper forms usually entirely by folding.

Powered by VanillaForums, Designed by Steam