It looks like you're new here. If you want to get involved, click one of these buttons!
I've been running into an issue with 8.5x11 plans where PDFs plot correctly, but on our Sharp MX-3050N, the plot is shifted up and to the right. Settings as follows:
- LIMITS 0,0 to 8.5,11
- Plot area is set to layout
One thing I've noticed is that the plot area shown in paper space by a dashed white line shows up correctly according to the LIMITS setting for "Print as PDF.pc3" but when set to the Sharp .pc3 file, the plot area shows up as being from 0,0 to 8.1666,10.6667.
At Bricsys' suggestion, I updated the Sharp drivers on my computer, then in the Custom Properties > Layout tab, set the print position to -0.2,+0.2. This alleviated the problem on my computer, however it did nothing on one of the other computers in the office.
Has anyone else had this issue? How can I get the plot area for the Sharp set correctly according to LIMITS?