Printing and Plotting

Discussion List

• PDF from Bricscad creating strange filled square on Print

  708 views 12 comments 0 points Most recent by Anthony Apostolaros November 2020
• Automatically open after Print as PDF

  4.8K views 6 comments 0 points Most recent by RSW November 2020
• problem with Xref color definitions when publishing multiple layouts

  859 views 4 comments 0 points Most recent by Assaf Ben-Nun August 2020
• Plot Stamp is Five Hours Behind

  279 views 3 comments 0 points Most recent by Roy Klein Gebbinck July 2020
• Page setup

  1.7K views 3 comments 0 points Most recent by fs_at12 June 2020
• New paper space layout tab position

  249 views 2 comments 0 points Most recent by gdenley June 2020
• Print As PDF.pc3: this plotter configuration cannot be used. Either driver or device cannot be found

  2.4K views 6 comments 1 point Most recent by MDunn May 2020
• exportpdf

  223 views 0 comments 0 points Started by HOSchlüter May 2020
• Printing orientation problems

  1.7K views 4 comments 0 points Most recent by BillD April 2020
• Publish DWG's in v2020

  310 views 2 comments 0 points Most recent by Kresimir Bedenikovic April 2020
• Changes in .CTB file does not change plot

  388 views 1 comment 0 points Most recent by Slim April 2020
• Illegible Mac Bricscad pdf text output when viewed in Adobe Reader

  1.1K views 14 comments 0 points Most recent by SteveDaniels April 2020
• PDFs distorted when opened with SoftMaker FlexiPDF editor

  238 views 2 comments 0 points Most recent by SteveDaniels April 2020
• Layers set to 'no plot' are still printed

  1.4K views 1 comment 0 points Most recent by PaulS April 2020
• Finding scale of a dwg relative to plot size

  2.3K views 13 comments 0 points Most recent by Michael Mayer March 2020
• A0+ plotting

  531 views 4 comments 0 points Most recent by Peter Bontekoe February 2020
• (missing: DWG to PDF.pc3)

  7.6K views 2 comments 0 points Most recent by KimbleC February 2020
• Plotting XREF's as a Gray (Grey) Shade

  5.4K views 13 comments 0 points Most recent by James Maeding February 2020
• Live Viewport

  263 views 3 comments 0 points Most recent by ericvandee January 2020
• Trouble with correct scaling in a viewport within a layout

  3.6K views 12 comments 0 points Most recent by IdahoDixon January 2020
• "Center on page" disabled in Page Setup?

  652 views 2 comments 0 points Most recent by IdahoDixon January 2020
• How-to Needed: Printing to PDF File Name Without "-model"

  409 views 2 comments 0 points Most recent by chillme1 January 2020
• Problem with print A3 format in Bricscad V20

  602 views 2 comments 0 points Most recent by shalan January 2020
• Mixing millimetres and centimetres

  289 views 3 comments 0 points Most recent by David Waight January 2020
• text (some fonts) prints different size/width when compared with display on Brexit

  238 views 1 comment 0 points Most recent by pendean January 2020
• Is it possible to plot blue print in bricscad?

  1.5K views 17 comments 0 points Most recent by Anthony Apostolaros January 2020
• Strange plot area difference

  824 views 7 comments 0 points Most recent by Mike November 2019
• Printing all layout in a PDF

  1.4K views 2 comments 0 points Most recent by plabill November 2019
• PCP to CTB

  4.5K views 1 comment 0 points Most recent by MDunn September 2019
• Attach Status to Layout/Viewport

  839 views 6 comments 0 points Most recent by Jason Bourhill August 2019