3D Modeling

Discussion List

• Subtract Procedure Help

  Closed 1.5K views 16 comments 0 points Most recent by Michael Mayer July 2018
• Slice command

  Closed 455 views 6 comments 0 points Most recent by Michael Mayer July 2018
• Upside down

  Closed 764 views 2 comments 0 points Most recent by mlwebb July 2018
• Wrapping 2D sketches around cylinders then cut/extrude

  Closed 445 views 5 comments 0 points Most recent by Heinz-Joachim Schulz July 2018
• Polar array of swept objects

  Closed 228 views 1 comment 0 points Most recent by Roy Klein Gebbinck June 2018
• Increasing performance on a complex 3D part

  Closed 316 views 4 comments 0 points Most recent by akendall1966 June 2018
• Measure distance between 2 Faces without enabling <Annotate> <Dimension>

  Closed 1.3K views 6 comments 0 points Most recent by DFLY June 2018
• Does Bricscad work with Revit models (IFC import)

  Closed 2.3K views 10 comments 0 points Most recent by Mathieu June 2018
• 3D constraints stopped working

  Closed 336 views 2 comments 0 points Most recent by Jim Canale June 2018
• 3D HVAC Layouts

  Closed 377 views 2 comments 0 points Most recent by Mathieu June 2018
• Default for SECTIONPLANESETTINGS?

  Closed 339 views 3 comments 0 points Most recent by Peter2 May 2018
• Suggestion for Standard Parts

  Closed 179 views 0 comments 0 points Started by edsp May 2018
• Region to solid (for create a terrain model)

  Closed 486 views 2 comments 0 points Most recent by Davide_M May 2018
• removing 3d fillets or chamfers.

  Closed 2.1K views 16 comments 0 points Most recent by Jim Canale May 2018
• Deleted / Missing solids after save

  Closed 665 views 11 comments 0 points Most recent by Patrik Sparrman May 2018
• Defeature or Shrinkwrap option.

  Closed 1.1K views 2 comments 0 points Most recent by fatguy April 2018
• dmextrude default

  Closed 722 views 19 comments 0 points Most recent by Michael Mayer April 2018
• Newbie question.

  Closed 1.1K views 10 comments 0 points Most recent by stlfinder April 2018
• Collision detection?- Answered

  Closed 786 views 5 comments 0 points Most recent by Michael Mayer April 2018
• How can I pick up a single vertex from a 3D solid and move it?

  Closed 1.6K views 13 comments 0 points Most recent by Michael Mayer April 2018
• Can't extrude existing solid to another surface V18

  Closed 566 views 6 comments 0 points Most recent by Tim Neumann April 2018
• Copy holes (faces)

  Closed 307 views 1 comment 0 points Most recent by Ian Johnson March 2018
• Mesh to Solid?

  Closed 736 views 2 comments 0 points Most recent by Michael Mayer March 2018
• adding materials to doors windows in Linux

  Closed 234 views 4 comments 0 points Most recent by Rodolphe Simon March 2018
• Offset the hole not the whole

  Closed 1.1K views 24 comments 0 points Most recent by Michael Mayer March 2018
• Re:deselect surfaces

  Closed 877 views 15 comments 0 points Most recent by Michael Mayer March 2018
• DMEXTRUDEMODE and layers

  Closed 496 views 7 comments 0 points Most recent by Roy Klein Gebbinck March 2018
• Dynamic UCS on Regions/Surfaces

  Closed 752 views 11 comments 0 points Most recent by Patrik Sparrman March 2018
• Converting a perspective view to a flat drawing?

  Closed 2.9K views 27 comments 0 points Most recent by Patrik Sparrman February 2018
• BOM - Customization?

  Closed 178 views 0 comments 0 points Started by crpt2008 February 2018