3D Modeling

Discussion List

• is it possible to create tin surface from DEM/SRTM file in bricscad?

  Accepted Answer 347 views 6 comments 0 points Most recent by aridzv May 2021
• Coming from Sketchup, anyone?

  183 views 8 comments 0 points Most recent by Michael Mayer May 2021
• _dmDistance3d between array and solid

  27 views 0 comments 0 points Started by Sebastian April 2021
• Contour labels - is it possible to add Contour labels to Contour linens extracted from a Tin surface

  Accepted Answer 582 views 13 comments 0 points Most recent by aridzv April 2021
• Newby Question - Projecting 3d geometry to a 2d sketch

  192 views 4 comments 0 points Most recent by Michael Mayer April 2021
• Will Twinmotion bring photogrammetry to Bricscad?

  145 views 0 comments 0 points Started by Tom Foster April 2021
• Adding BIM section to properties

  129 views 2 comments 0 points Most recent by Michael Mayer April 2021
• What is a 3D Solid Ply?

  157 views 2 comments 0 points Most recent by João Santos April 2021
• BricsCAD BIM wblock, UCS/WCS away from insertionpoint

  78 views 0 comments 0 points Started by Harr March 2021
• Push/pul after Projectgeometry

  108 views 2 comments 0 points Most recent by Chiyan March 2021
• editing triangles in TIN surface

  307 views 2 comments 0 points Most recent by ALANH March 2021
• Coping/notching wide flange beam V21 mech

  181 views 4 comments 0 points Most recent by Tim Neumann March 2021
• Broken Textures

  111 views 3 comments 0 points Most recent by Michael Mayer March 2021
• Lofting Issues

  132 views 1 comment 0 points Most recent by Chiyan March 2021
• nwcout from Bricscad

  Answered 488 views 3 comments 0 points Most recent by Hans Lammerts February 2021
• Creating a Tin surface from point cloud - workflow and optimisations

  682 views 3 comments 0 points Most recent by James Maeding February 2021
• Compressing a 3D Drawing

  100 views 2 comments 0 points Most recent by destrucktive February 2021
• Cannot Click on anywhere on V20.11.2 Mac OS BIG

  171 views 6 comments 0 points Most recent by Michael Mayer January 2021
• How do you used 3D Parametrized Angular Constraints?

  Accepted Answer 176 views 6 comments 0 points Most recent by MilesAlex January 2021
• Q. Herringbone and Helix Gears with Sweep.

  97 views 2 comments 0 points Most recent by ktm350excf January 2021
• What you see is NOT what you get

  185 views 3 comments 0 points Most recent by RSW January 2021
• How can I fix problems in components that I’ve made.

  Answered 179 views 1 comment 0 points Most recent by RSW January 2021
• Mesh facetres - disable lines

  223 views 11 comments 0 points Most recent by RSW January 2021
• Modeling after Rhino to bricscad

  158 views 1 comment 0 points Most recent by RSW December 2020
• Aerial Image assingned to a box.

  109 views 2 comments 0 points Most recent by Hans Lammerts December 2020
• Joining Solids

  338 views 5 comments 0 points Most recent by Louis_Verdonck December 2020
• How do i fix messed up constrained orbit ?

  Accepted Answer 142 views 1 comment 0 points Most recent by DFLY December 2020
• How to add constraints to a cam and follower for kinematic analysis

  65 views 0 comments 0 points Started by ScottW December 2020
• massprop calculation issue

  133 views 1 comment 0 points Most recent by ScottS December 2020
• Change radius of existing fillet

  224 views 3 comments 0 points Most recent by Michael Mayer December 2020