Discussion List

• Tell us how you Customize BricsCAD!

  Closed 966 views 23 comments 0 points Most recent by ALANH May 2021
• Soooo many question....

  315 views 4 comments 0 points Most recent by Michael Mayer May 2021
• ORTHO issue

  573 views 13 comments 0 points Most recent by Louis_Verdonck May 2021
• ROTATE3D using points for Base and New Angle

  475 views 7 comments 0 points Most recent by RoatanBill May 2021
• _dmDistance3d between array and solid

  123 views 2 comments 0 points Most recent by Sebastian May 2021
• Manipulator alignment - how to get it square to the XYZ

  203 views 2 comments 0 points Most recent by RoatanBill May 2021
• trouble assigning image to TIN surface

  528 views 6 comments 0 points Most recent by pcVS May 2021
• VIEWBASE as a special viewport. How to view a 2D layer?

  1.4K views 9 comments 0 points Most recent by João Santos May 2021
• is it possible to create tin surface from DEM/SRTM file in bricscad?

  1.1K views 6 comments 0 points Most recent by aridzv May 2021
• Coming from Sketchup, anyone?

  378 views 8 comments 0 points Most recent by Michael Mayer May 2021
• _dmDistance3d between array and solid

  43 views 0 comments 0 points Started by Sebastian April 2021
• Contour labels - is it possible to add Contour labels to Contour linens extracted from a Tin surface

  1.4K views 13 comments 0 points Most recent by aridzv April 2021
• Newby Question - Projecting 3d geometry to a 2d sketch

  378 views 4 comments 0 points Most recent by Michael Mayer April 2021
• Adding BIM section to properties

  225 views 2 comments 0 points Most recent by Michael Mayer April 2021
• What is a 3D Solid Ply?

  228 views 2 comments 0 points Most recent by João Santos April 2021
• BricsCAD BIM wblock, UCS/WCS away from insertionpoint

  132 views 0 comments 0 points Started by Harr March 2021
• Push/pul after Projectgeometry

  160 views 2 comments 0 points Most recent by Chiyan March 2021
• editing triangles in TIN surface

  780 views 2 comments 0 points Most recent by ALANH March 2021
• Coping/notching wide flange beam V21 mech

  394 views 4 comments 0 points Most recent by Tim Neumann March 2021
• Broken Textures

  181 views 3 comments 0 points Most recent by Michael Mayer March 2021
• Lofting Issues

  220 views 1 comment 0 points Most recent by Chiyan March 2021
• nwcout from Bricscad

  1.1K views 3 comments 0 points Most recent by Hans Lammerts February 2021
• Creating a Tin surface from point cloud - workflow and optimisations

  1.3K views 3 comments 0 points Most recent by James Maeding February 2021
• Compressing a 3D Drawing

  159 views 2 comments 0 points Most recent by destrucktive February 2021
• Cannot Click on anywhere on V20.11.2 Mac OS BIG

  283 views 6 comments 0 points Most recent by Michael Mayer January 2021
• How do you used 3D Parametrized Angular Constraints?

  211 views 6 comments 0 points Most recent by MilesAlex January 2021
• Q. Herringbone and Helix Gears with Sweep.

  138 views 2 comments 0 points Most recent by ktm350excf January 2021
• What you see is NOT what you get

  284 views 3 comments 0 points Most recent by RSW January 2021
• How can I fix problems in components that I’ve made.

  314 views 1 comment 0 points Most recent by RSW January 2021
• Mesh facetres - disable lines

  513 views 11 comments 0 points Most recent by RSW January 2021