3D Modeling

Discussion List

• Subtract, Slice, Interfere, ... How to do this?

  348 views 8 comments 0 points Most recent by RoatanBill July 2021
• 3D Textures or Bump Mapping for 3D printing

  796 views 3 comments 0 points Most recent by Jeffery2k July 2021
• Slab finish. Automatically Updatable.

  97 views 1 comment 0 points Most recent by Michael Mayer June 2021
• How to remove multiple coincident solids in a drawing.

  863 views 7 comments 0 points Most recent by Michael Mayer June 2021
• properties panel is not visible.

  1.5K views 3 comments 0 points Most recent by rose_barfield June 2021
• TIN size

  354 views 6 comments 0 points Most recent by Hans Lammerts June 2021
• Generating thumbnails in the Library

  457 views 6 comments 0 points Most recent by Terry Dotson June 2021
• Correct way to model from CAD drawings.

  211 views 1 comment 0 points Most recent by Michael Mayer June 2021
• Code to turn blocks quickly when imported

  270 views 6 comments 0 points Most recent by Anthony Apostolaros June 2021
• Crash reports seemingly from BricsCAD cmdapi.dll

  233 views 2 comments 0 points Most recent by Richard Beneke June 2021
• Code to turn blocks quickly when imported

  50 views 0 comments 0 points Started by Bas Weinans June 2021
• Tell us how you Customize BricsCAD!

  Closed 932 views 23 comments 0 points Most recent by ALANH May 2021
• Soooo many question....

  287 views 4 comments 0 points Most recent by Michael Mayer May 2021
• ORTHO issue

  521 views 13 comments 0 points Most recent by Louis_Verdonck May 2021
• ROTATE3D using points for Base and New Angle

  421 views 7 comments 0 points Most recent by RoatanBill May 2021
• _dmDistance3d between array and solid

  120 views 2 comments 0 points Most recent by Sebastian May 2021
• Manipulator alignment - how to get it square to the XYZ

  182 views 2 comments 0 points Most recent by RoatanBill May 2021
• trouble assigning image to TIN surface

  467 views 6 comments 0 points Most recent by pcVS May 2021
• VIEWBASE as a special viewport. How to view a 2D layer?

  1.2K views 9 comments 0 points Most recent by João Santos May 2021
• is it possible to create tin surface from DEM/SRTM file in bricscad?

  939 views 6 comments 0 points Most recent by aridzv May 2021
• Coming from Sketchup, anyone?

  327 views 8 comments 0 points Most recent by Michael Mayer May 2021
• _dmDistance3d between array and solid

  41 views 0 comments 0 points Started by Sebastian April 2021
• Contour labels - is it possible to add Contour labels to Contour linens extracted from a Tin surface

  1.3K views 13 comments 0 points Most recent by aridzv April 2021
• Newby Question - Projecting 3d geometry to a 2d sketch

  337 views 4 comments 0 points Most recent by Michael Mayer April 2021
• Adding BIM section to properties

  204 views 2 comments 0 points Most recent by Michael Mayer April 2021
• What is a 3D Solid Ply?

  215 views 2 comments 0 points Most recent by João Santos April 2021
• BricsCAD BIM wblock, UCS/WCS away from insertionpoint

  125 views 0 comments 0 points Started by Harr March 2021
• Push/pul after Projectgeometry

  151 views 2 comments 0 points Most recent by Chiyan March 2021
• editing triangles in TIN surface

  694 views 2 comments 0 points Most recent by ALANH March 2021
• Coping/notching wide flange beam V21 mech

  365 views 4 comments 0 points Most recent by Tim Neumann March 2021